Stamp It Spring Fling Blog Hop

Welcome to the Stamp It Group Spring Fling Blog Hop

Did you get the FREE Flower & Field designer series paper (DSP) from the January – February 2021 sale-a-bration (SAB)? If not, you have until February 28th, 2021 to make a qualifying purchase and receive your 12 piece (2 each of 6 designs) pack FREE! *while supplies last

My card base is in Misty Moonlight 4 1/2” x 11” scored at 5 1/2”. Then you will cut 2 3/4” off of one side (put to the side – we will use that piece a bit later).

Now cut 2 pieces of DSP

* 1” x 4” (set aside)

* 2 1/2” x 4” (This piece will go on the short flap of your card base)


Cut 2 pieces of Basic White

* 5 1/4” x 4” (inside of card. Take the 1” x 4” strip of DSP you set aside and overlap your white and card base just a bit)

* 2 1/2” x 4” (Will adhere to the 2 3/4” piece we set aside from our card stock. You might want to stamp first)



 Don’t forget to comment with #stampitcontest for your chance to win like


Product List

Paper Snips

[103579]
$10.00

Share This:

Stamp It Valentines Blog Hop

Welcome to Stamp It team Valentines Blog Hop

Thank you for stopping by today. It’s definitely been a busy time these last several months and all things considered, I’ve lost my crafting mojo. It was definitely good to play a little bit. Using only current product, I had to be a little creative. Boy, I sure do miss the large letter dies. Surprisingly I made it happen.

Firstly, my card base in Flirty Flamingo is standard A2 (5 1/2“ x 8 1/2“ scored at 4 1/4” on the 8 1/2” side) From the Snail Mail Designer Series Paper (DSP) pack I chose two different patterns. The first for a layer on my card base (4” x 5 1/4”) has the real red scribbles. From the side in Real Red with Blushing Bride hearts, afterwards, I cut 1/2” x 2” strips for my letters.

For the center of the E and foot of the L, I cut one strip in half to be 1/2” x 1” For the “O” you can basically do whatever your creative mind thinks of. First I thought of the postage stamp punch, then the Apple Builder, I mean there are sometimes worms in Apples. Worms/slugs ‘the apple of your eye’ you get it. 🙂 I chose the Heart Punch Pack and fussy cut my snail.

All of a sudden I realized I had used NO STAMPS on this card. This is pretty #simplestamping if you will. Great start for a child, especially if you might not want to get the inks out.

 

Additionally, don’t forget to enter this months drawing by leaving a comment using #stampitcontest and you could win just like

Lastly, make sure to visit my other team members for some great card ideas.

 

Product List

Paper Snips

$10.00

Share This:

Stamp It Halloween Blog Hop

The Stamp It Halloween Blog Hop is under way. Thanks for stopping by my very quick and simple post this month.

We are in stages of moving and I have been packing up my craft room. With limited supplies now available, I chose to do an alternative card using a couple scrap pieces and the stamp set from this month’s Paper Pumpkin.

? Daffodil Delight card base 5 1/2” x 8 1/2” scored at 4 1/2”

? Gorgeous Grape scrap

? Plaid Tidings scrap

? 2 1/4” Very Vanilla Circle 

? Stamped the hat in black memento

? Because The Paper Pumpkin stamp set is photopolymer, I was able to curve the sentiment to fit within my circle.

? Gentle swipes of Wink of Stella

Don’t forget to leave a comment like Martha did for your chance to win this AWESOME kit.

 

Product List

Paper Snips

$10.00

Share This:

Stamp It Fall Blog Hop

Welcome to the Stamp It Fall Blog Hop.

I am pleased with how this faux tile like backsplash turned out using Love of Leaves stamp set. The card base is 8 1/2” x 5 1/2” in Crushed Curry, scored at 4 1/4”. The next layer is Blackberry Bliss 1/4” smaller all around at 4” x 5 1/4”.

Next is Very Vanilla cut 3 3/4” x 4”. Scoring left to right every 1/2”, rotate Very Vanilla 90° and repeat scoring every 1/2”. This will give you a reduced scale of what replicates a tiled backsplash. I stamped after scoring to create a separation in my stamped image for the illusion of grout lines. You could stamp first and then score if you wanted.


For the centered leaf, I used my Stampin’ Ink refills and the wet wipe technique. Using a few wet wipes folded in half, begin dropping various ink spots randomly yet so different colors touch. The wet wipe now becomes your ink pad. The sentiment is stamped using Versamark and Gold embossing powder.

Don’t forget to enter like Donna did by leaving a comment using #stampitcontest along with your email.You too could win this wonderful card kit.

 

Product List

Paper Snips

$10.00

Share This:

Christmas in July Stamp It Blog Hop

Welcome to our Christmas in July Stamp It Blog Hop. I’m excited to share with you a returning favorite MERRY MOOSE. I also get to introduce you to PLUSH POINSETTIA SPECIALTY PAPER and PLAID TIDINGS.

Stampin’ Details:

  • The base is 4-1/4” x 11” CHERRY COBBLER cardstock, scored at 5-1/2’’ and folded.
  • You will use (2) 2-3/4” x 2’-3/4” BASIC BLACK Squares
    • (1) punch MERRY MOOSE
    • (1) base layer of sentiment and MERRY MOOSE
  • The WHISPER WHITE layer is also 2-3/4” x 2’-3/4” and die cut with STITCHED SHAPES SQUARE
    greeting from MERRY MOOSE stamp set was stamped with VERSAMARK + SHADED SPRUCE and embossed with CLEAR embossing powder.
  • Top decorative layer is 2-3/4” x 4” using your choice from three designs of PLUSH POINSETTIA SPECIALTY PAPER
  • Bottom decorative layer is 2” x 4” using your choice from 12 designs of PLAID TIDINGS
  • Using DIMENSIONALS, I popped the BASIC BLACK base layer and punched MERRY MOOSE 

 

 

Make sure you also enter using #stampitcontest to be entered into the monthly drawing just like

 

 

 

Product List

Paper Snips

$10.00

Share This:

Stamp It Patriotic – Summer Blog Hop

Welcome to the Team Stamp It Patriotic Summer Blog Hop

In these ever changing times, I wanted to display the versatility of The Ornate Thanks Bundle applying a patriotic color scheme. You can find The Ornate Thanks Bundle along with all the supplies in today’s showcased card in my online store.

Starting first with a piece of Stampin’ Up!’s Whisper White cut at 4 3/4″ x 5 1/4″. I taped a scrap piece of paper with Washi tape and began applying Pacific Point Blue with a sponge dauber. Starting lightly from the bottom working outward and upward with my Pacific Point Blue. I love the brightness of this blue. (I have to admit I intended for my color to be slightly lighter but I can be heavy handed sometimes) Then I began working downward and still outward using Real Red with a sponge dauber as well.

Next was die cutting a floral edge using a Ornate Border dies. Because the die cut can be delicate, I sometimes use a piece of Washi tape to hold my intricate dies in place. Once I peel the Washi tap off, it can be more forgiving and delicate, not tearing your paper.

 

As a result of building this card, I took photos to showcase the different steps and maybe the level of stamping you feel comfortable with. Honestly, even the beginner can create this fabulous card. For instance, my #simplestamping image blossomed into an awesome card for even the avid stamper.

Added to Basic Gray Cardstock cut 4 1/4” x 5 1/2”

Stamping the sentiment using So Grateful and for all you do

Next I have added Rhinestone Basic Jewels to the center of all flowers

Taking it up I added the Metallic-Edge Ribbon in Silver

Because my ribbon frayed in the above image, it’s simply upgraded with a faux bow to cover

 

Don’t forget to enter for this awesome card kit by commenting #stampitcontest just like this month’s winner did. Congratulations 

 

 


Product List

SNAIL Permanent Adhesive

Snail Adhesive
[104332]
$7.00

Paper Snips

[103579]
$10.00

Share This: